Training Services | :: AP Solutions, Inc. ::

IPC-A-600 CIS Certification/Recertification Dec 2 - 4

This is a training course for IPC-A-600 operator training. The training takes place from December 2, 2024 to December 4, 2024.

IPC-A-600 CIT Certification/Recertification Dec 2 - 4

This is a training course for IPC-A-600 instructor training. The training takes place from December 2, 2024 to December 4, 2024. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

IPC-A-600 CSE Certification Dec 2 - 4

This is a training course for IPC-A-600 CSE Certification training. The training takes place from December 2, 2024 to December 4, 2024.

J-STD-001 CIS Recertification Dec 2 - 4

J-STD-001 training is course for J-STD-001 Operator training. This course spans December 2, 2024, to December 4, 2024.

IPC-A-610 CIT Recertification Dec 5 -6

This is a training recertification course for IPC-A-610 instructor training. The training takes place from December 5, 2024 to December 6, 2024. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

IPC-A-620 CIT Recertification Dec 5 - 6

This is a training recertification course for IPC 620 instructor training. The training takes place from December 5, 2024 to December 6, 2024. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

IPC-A-620 Space Addendum Dec 9 - 13

This is a training course for IPC 620 Space Addendum training. The training takes place from December 9, 2024 to December 13, 2024.

J-STD-001 CIS Certification Dec 9 - 13

This is a training course for J-STD-001 operator training. The training takes place from December 9, 2024, to December 13, 2024.

J-STD-001 CIS Certification Dec 9 - 13

This is a training course for J-STD-001 operator training. The training takes place from December 9, 2024, to December 13, 2024.

J-STD-001 CIT Certification Dec 9 - 13

This is a training course for J-STD-001 instructor training. The training takes place from December 9, 2024 to December 13, 2024.

7711/7721 CIS Certification Dec 16 - 20

This is a training course for 7711/7721 operator training. The training takes place from December 16, 2024, to December 20, 2024.

7711/7721 CIT Certification Dec 16 - 20

This is a training course for 7711/7721 instructor training. The training takes place from December 16, 2024, to December 20, 2024.

7711/7721 CSE Certification Dec 16 - 20

This is a training course for 7711/7721 CSE Certification training. The training takes place from December 16, 2024, to December 20, 2024.

IPC-A-620 CIS Certification/Recertification Dec 16 - 18

This is a training course for IPC 620 operator training. The training takes place from December 16, 2024 to December 18, 2024.

IPC-A-620 CIT Certification Dec 16 - 19

This is a training course for IPC 620 instructor training. This Course spans from December 16, 2024 to December 19, 2024.

IPC-A-620 CSE Certification Dec 16 - 19

This is a training course for IPC-A-620 CSE Certification training. This training takes place from December 16, 2024 to December 19, 2024.

7711/7721 CIT Recertification Dec 30 - 31

This is a training recertification course for 7711/7721 instructor training. The training takes place from December 30, 2024, to December 31, 2024. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

J-STD-001 CIT Recertification Dec 30 - 31

This is a training recertification course for J-STD-001 instructor training. The training takes place from December 30, 2024, to December 31, 2024. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

7711/7721 CIS Recertification Jan 6 - 8

This is a training re-certification course for 7711/7721 operator training. The training takes place from January 6, 2025, to January 8, 2025.

IPC-A-610 CIT Recertification Jan 6 - 7

This is a training recertification course for IPC-A-610 instructor training. The training takes place from January 6, 2025 to January 7, 2025. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

7711/7721 CIT Recertification Jan 9 - 10

This is a training recertification course for 7711/7721 instructor training. The training takes place from January 9, 2025, to January 10, 2025. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

IPC-A-620 CIT Recertification Jan 9 - 10

This is a training recertification course for IPC 620 instructor training. The training takes place from January 9, 2025 to January 10, 2025. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

IPC-A-610 CIS Certification/Recertification Jan 14 - 16

IPC-A-610 training is course for IPC 610 Operator training. This course spans January 14, 2025 to January 16, 2025.

IPC-A-610 CIT Certification Jan 14 - 17

This is a training course for IPC-A-610 instructor training. The training takes place from January 14, 2025 to January 17, 2025.

IPC-A-610 CSE Certification Jan 14 - 17

This is a training course for IPC-A-610 CSE training. The training takes place January 14, 2025 to January 17, 2025.

IPC-A-620 CIS Certification/Recertification Jan 14 - 16

This is a training course for IPC 620 operator training. The training takes place from January 14, 2025 to January 16, 2025.

IPC-A-620 CIT Certification Jan 14 - 17

This is a training course for IPC 620 instructor training. This Course spans from January 14, 2025 to January 17, 2025.

IPC-A-620 CSE Certification Jan 14 - 17

This is a training course for IPC-A-620 CSE Certification training. This training takes place from January 14, 2025 to January 17, 2025.

7711/7721 CIS Certification Jan 20 - 24

This is a training course for 7711/7721 operator training. The training takes place from January 20, 2025, to January 24, 2025.

7711/7721 CIT Certification Jan 20 - 24

This is a training course for 7711/7721 instructor training. The training takes place from January 20 2025, to January 24, 2025.

7711/7721 CSE Certification Jan 20 - 24

This is a training course for 7711/7721 CSE Certification training. The training takes place from January 20, 2025, to January 24, 2025.

J-STD-001 CIS Certification Jan 20 - 24

This is a training course for J-STD-001 operator training. The training takes place from January 20, 2025, to January 24, 2025.

J-STD-001 CIT Certification Jan 20 - 24

This is a training course for J-STD-001 instructor training. The training takes place from January 20, 2025 to January 24, 2025.

J-STD-001 CSE Certification Jan 20 - 24

This is a training course for J-STD-001 CSE training. The training takes place from January 20, 2025, to January 24, 2025.

IPC-A-600 CIS Certification/Recertification Jan 27 - 29

This is a training course for IPC-A-600 operator training. The training takes place from January 27, 2025 to January 29, 2025.

IPC-A-600 CIT Certification/Recertification Jan 27 - 29

This is a training course for IPC-A-600 instructor training. The training takes place from January 27, 2025 to January 29, 2025. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

IPC-A-600 CSE Certification Jan 27 - 29

This is a training course for IPC-A-600 CSE Certification training. The training takes place from January 27, 2025 to January 29, 2025.

J-STD-001 CIS Recertification Jan 28 - 30

J-STD-001 training is course for J-STD-001 Operator training. This course spans January 28, 2025, to January 30, 2025.

7711/7721 CIS Certification Feb 3 - 7

This is a training course for 7711/7721 operator training. The training takes place from February 3, 2025, to February 7, 2025.

7711/7721 CIT Certification Feb 3 - 7

This is a training course for 7711/7721 instructor training. The training takes place from February 3, 2025, to February 7, 2025.

7711/7721 CSE Certification Feb 3 - 7

This is a training course for 7711/7721 CSE Certification training. The training takes place from February 3, 2025, to February 7, 2025.

J-STD-001 CIS Certification Feb 3 - 7

This is a training course for J-STD-001 operator training. The training takes place from February 3, 2025, to February 7, 2025.

J-STD-001 CIT Certification Feb 3 - 7

This is a training course for J-STD-001 instructor training. The training takes place from February 3, 2025 to February 7, 2025.

J-STD-001 CSE Certification Feb 3 - 7

This is a training course for J-STD-001 CSE training. The training takes place from February 3, 2025, to February 7, 2025.

7711/7721 CIT Recertification Feb 10 - 11

This is a training recertification course for 7711/7721 instructor training. The training takes place from February 10, 2025, to February 11, 2025. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

J-STD-001 CIT Recertification Feb 10 - 11

This is a training recertification course for J-STD-001 instructor training. The training takes place from February 10, 2025, to February 11, 2025. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

7711/7721 CIS Recertification Feb 12 - 14

This is a training re-certification course for 7711/7721 operator training. The training takes place from February 12, 2025, to February 14, 2025.

J-STD-001 CIS Recertification Feb 12 - 14

J-STD-001 training is course for J-STD-001 Operator training. This course spans February 12, 2025, to February 14, 2025.

IPC-A-610 CIS Certification/Recertification Feb 18 - 20

IPC-A-610 training is course for IPC 610 Operator training. This course spans February 18, 2025 to February 20, 2025.

IPC-A-610 CIT Certification Feb 18 - 21

This is a training course for IPC-A-610 instructor training. The training takes place from February 18, 2025 to February 21, 2025.

IPC-A-610 CSE Certification Feb 18 - 21

This is a training course for IPC-A-610 CSE training. The training takes place February 18, 2025 to February 21, 2025.

IPC-A-620 CIS Certification/Recertification Feb 18 - 20

This is a training course for IPC 620 operator training. The training takes place from February 18, 2025 to February 20, 2025.

IPC-A-620 CIT Certification Feb 18 - 21

This is a training course for IPC 620 instructor training. This Course spans from February 18, 2025 to February 21, 2025.

IPC-A-620 CSE Certification Feb 18 - 21

This is a training course for IPC-A-620 CSE Certification training. This training takes place from February 18, 2025 to February 21, 2025.

IPC-A-610 CIT Recertification Feb 24 - 25

This is a training recertification course for IPC-A-610 instructor training. The training takes place from February 24, 2025 to February 25, 2025. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

IPC-A-620 CIT Recertification Feb 24 - 25

This is a training recertification course for IPC 620 instructor training. The training takes place from February 24, 2025 to February 25, 2025. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

IPC-A-600 CIS Certification/Recertification Feb 26 - 28

This is a training course for IPC-A-600 operator training. The training takes place from February 26, 2025 to February 28, 2025.

IPC-A-600 CIT Certification/Recertification Feb 26 - 28

This is a training course for IPC-A-600 instructor training. The training takes place from February 26, 2025 to February 28, 2025. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

IPC-A-600 CSE Certification Feb 26 - 28

This is a training course for IPC-A-600 CSE Certification training. The training takes place from February 26, 2025 to February 28, 2025.

J-STD-001 CIS Recertification Feb 26 - 28

J-STD-001 training is course for J-STD-001 Operator training. This course spans February 26, 2025, to February 28, 2025.

IPC-A-610 CIS Certification/Recertification Mar 3 - 5

IPC-A-610 training is course for IPC 610 Operator training. This course spans March 3, 2025 to March 5, 2025.

IPC-A-610 CIT Certification Mar 3 - 6

This is a training course for IPC-A-610 instructor training. The training takes place from March 3, 2025 to March 6, 2025.

IPC-A-610 CSE Certification Mar 3 - 6

This is a training course for IPC-A-610 CSE training. The training takes place March 3, 2025 to March 6, 2025.

IPC-A-620 CIS Certification/Recertification Mar 3 - 5

This is a training course for IPC 620 operator training. The training takes place from March 3, 2025 to March 5, 2025.

IPC-A-620 CIT Certification Mar 3 - 6

This is a training course for IPC 620 instructor training. This Course spans from March 3, 2025 to March 6, 2025.

IPC-A-620 CSE Certification Mar 3 - 6

This is a training course for IPC-A-620 CSE Certification training. This training takes place from March 3, 2025 to March 6, 2025.

7711/7721 CIS Certification Mar 10 - 14

This is a training course for 7711/7721 operator training. The training takes place from March 10, 2025, to March 14, 2025.

7711/7721 CIT Certification Mar 10 - 14

This is a training course for 7711/7721 instructor training. The training takes place from March 10, 2025, to March 14, 2025.

7711/7721 CSE Certification Mar 10 - 14

This is a training course for 7711/7721 CSE Certification training. The training takes place from March 10, 2025, to March 14, 2025.

J-STD-001 CIS Certification Mar 10 - 14

This is a training course for J-STD-001 operator training. The training takes place from March 10, 2025, to March 14, 2025.

J-STD-001 CIT Certification Mar 10 - 14

This is a training course for J-STD-001 instructor training. The training takes place from March 10, 2025 to March 14, 2025.

J-STD-001 CSE Certification Mar 10 - 14

This is a training course for J-STD-001 CSE training. The training takes place from March 10, 2025, to March 14, 2025.

7711/7721 CIS Recertification Mar 17 - 19

This is a training re-certification course for 7711/7721 operator training. The training takes place from March 17, 2025, to March 19, 2025.

IPC-A-620 Space Addendum Mar 17 - 21

This is a training course for IPC 620 Space Addendum training. The training takes place from March 17, 2025 to March 21, 2025.

IPC-A-620 CIT Recertification Mar 20 - 21

This is a training recertification course for IPC 620 instructor training. The training takes place from March 20, 2025 to March 21, 2025. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

IPC-A-610 CIT Recertification Mar 24 - 25

This is a training recertification course for IPC-A-610 instructor training. The training takes place from March 24, 2025 to March 25, 2025. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

J-STD-001 CIT Recertification Mar 27 - 28

This is a training recertification course for J-STD-001 instructor training. The training takes place from March 27, 2025, to March 28, 2025. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

7711/7721 CIS Certification Mar 31 - Apr 4

This is a training course for 7711/7721 operator training. The training takes place from March 31, 2025, to April 4, 2025.

7711/7721 CIT Certification Mar 31 - April 4

This is a training course for 7711/7721 instructor training. The training takes place from March 31, 2025, to April 4, 2025.

7711/7721 CSE Certification Mar 31 - Apr 4

This is a training course for 7711/7721 CSE Certification training. The training takes place from March 31, 2025, to April 4, 2025.

J-STD-001 CIS Certification Mar 31 - Apr 4

This is a training course for J-STD-001 operator training. The training takes place from March 31, 2025, to April 4, 2025.

J-STD-001 CIT Certification Mar 31 - Apr 4

This is a training course for J-STD-001 instructor training. The training takes place from March 31, 2025 to April 4, 2025.

J-STD-001 CSE Certification Mar 31 - Apr 4

This is a training course for J-STD-001 CSE training. The training takes place from March 31, 2025, to April 4, 2025.

IPC-A-610 CIT Recertification Apr 10 - 11

This is a training recertification course for IPC-A-610 instructor training. The training takes place from April 10, 2025 to April 11, 2025. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

IPC-A-610 CIS Certification/Recertification Apr 14 - 16

IPC-A-610 training is course for IPC 610 Operator training. This course spans April 14, 2025 to April 16, 2025.

IPC-A-610 CIT Certification Apr 14 - 17

This is a training course for IPC-A-610 instructor training. The training takes place from April 14, 2025 to April 17, 2025.

IPC-A-610 CSE Certification Apr 14 - 17

This is a training course for IPC-A-610 CSE training. The training takes place April 14, 2025 to April 17, 2025.

7711/7721 CIT Recertification Apr 23 - 24

This is a training recertification course for 7711/7721 instructor training. The training takes place from April 23, 2025, to April 24, 2025. **************************************************************************************** ** CIT Renewal through Retesting Requirements (per Policy & Procedures) ** A CIT may renew his or her certification through retesting. To qualify for renewal through retesting, a CIT shall conduct at least two IPC CIS courses to a minimum total of ten CIS candidates during their twenty-four-month certification period. These courses shall be conducted prior to their certification renewal testing. In order to qualify for the renewal requirement. A CIT who fails to disclose when these teaching requirements have not been met are subject to revocation of any or all IPC Certificates held by the CIT. ****************************************************************************************

J-STD-001 CIS Recertification May 12 - 14

J-STD-001 training is course for J-STD-001 Operator training. This course spans May 12, 2025, to May 14, 2025.